Print Page | Close Window

Black/gray drain Belt and Suspenders

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=11840
Printed Date: 26 Jun 2025 at 5:15pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com


Topic: Black/gray drain Belt and Suspenders
Posted By: GlueGuy
Subject: Black/gray drain Belt and Suspenders
Date Posted: 06 Jul 2018 at 10:18am
After seeing the results of what happens if the brackets for either the black or gray water tank drains fails, I decided to invest in a little preventative measure. I call this "belt and suspenders", as if one bracket fails, there will be a second "just in case". 

The parts I used are all stainless except for the clevis hangars, which are epoxy coated. I could have used stainless clevis hangars, but the 3" one is $5 in epoxy coated, and $30 in stainless. In this particular instance, I chose overkill instead of massive overkill.

All of the nuts are stainless nylock nuts.


Black water hangar:



Gray water hangar:





-------------
bp
2017 R-Pod 179 Hood River
2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost



Replies:
Posted By: Ben Herman
Date Posted: 06 Jul 2018 at 1:32pm
Nice job! Where do you get the clevis hangers?


Posted By: GlueGuy
Date Posted: 06 Jul 2018 at 1:45pm
Originally posted by Ben Herman

Nice job! Where do you get the clevis hangers?
Got them from Ferguson ( https://www.ferguson.com/product/fnw-epoxy-plated-adjustable-long-drop-clevis-hanger-fnw7006ep/_/A-ProdFamily-133824 - https://www.ferguson.com/product/fnw-epoxy-plated-adjustable-long-drop-clevis-hanger-fnw7006ep/_/A-ProdFamily-133824 )

Remember, these hangars go by the ID of the pipe (not the OD). So the 3-1/2" (OD) black water pipe is actually a 3" (ID) hangar.


-------------
bp
2017 R-Pod 179 Hood River
2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost


Posted By: crankster78
Date Posted: 06 Jul 2018 at 3:52pm
Greetings

 Nice job.    What I did is took a piece of strap, removed a bolt from the valve, installed the strap on the bolt, and drilled a couple of self taping bolts into the frame.   Tightened the bolt back up.  Took about 10 minutes.

Crankster78  


-------------
Crankster 78 R-179 2015


Posted By: wthoms2000
Date Posted: 25 Jul 2018 at 12:39pm
Same as Crankster78:
https://m.facebook.com/?_rdr#!/photo.php?fbid=10217417197960829&id=1201177476&set=p.10217417197960829&source=47 - https://m.facebook.com/?_rdr#!/photo.php?fbid=10217417197960829&id=1201177476&set=p.10217417197960829&source=47

Actually is ten minutes!

-------------
Porta Poddy
Wil and Luz, Orange County, CA
2017.5 179 HRE
2021 Ranger XLT FX4
REDARC Brake Controller



Print Page | Close Window

Bulletin Board Software by Web Wiz Forums® version 9.64 - http://www.webwizforums.com
Copyright ©2001-2009 Web Wiz - http://www.webwizguide.com