Print Page | Close Window

180 sway control

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Warranty, Service and Recall Bulletins
Forum Discription: Have a warranty or service experience to share?
URL: http://www.rpod-owners.com/forum_posts.asp?TID=11695
Printed Date: 28 Apr 2024 at 2:00pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com


Topic: 180 sway control
Posted By: MES Pod
Subject: 180 sway control
Date Posted: 08 Jun 2018 at 8:48pm
We just traded or 2015 178 in for a 2018 180, our dealer did not want to install the sway control from our 178 saying that it would void the warrenty, that we did not need it because these were for smaller units like pop-ups. any ideals, will it really void warrenty?. I'm really not quite sure I want to tow without it.

-------------
Ricky & Barbara
2021 Ford F-150, 2018 Pod 180



Replies:
Posted By: Tars Tarkas
Date Posted: 08 Jun 2018 at 10:06pm
I've never heard that adding a sway bar would void a Pod warranty.  I suppose one could argue about drilling or welding on the frame....  It might be a good time to look at something like a Fastway E2 WDH with integrated sway control (that let's you back up without undoing anything.

https://www.amazon.com/Fastway-Trunnion-92-00-0600-Distribution-Standard/dp/B0071L3T3G/ref=sr_1_2?ie=UTF8&qid=1528513429&sr=8-2&keywords=fastway+e2+weight+distribution+hitch+92-00-0600 - https://www.amazon.com/Fastway-Trunnion-92-00-0600-Distribution-Standard/dp/B0071L3T3G/ref=sr_1_2?ie=UTF8&qid=1528513429&sr=8-2&keywords=fastway+e2+weight+distribution+hitch+92-00-0600

TT


-------------
2010 176
FJ Cruiser


Posted By: mcarter
Date Posted: 09 Jun 2018 at 8:15am
+1 Tars, drilling the frame is the issue with some folks.

-------------
Mike Carter
2015 178
" I had the right to remain silent, I just didn't have the ability."


Posted By: lostagain
Date Posted: 09 Jun 2018 at 7:27pm
Did your dealer offer to sell you a new WDH?  

At cost, of course. Approve


-------------
Never leave footprints behind.
Fred & Maria Kearney
Sonoma 167RB
Our Pod 172
2019 Ford F-150 4x4 2.7 EcoBoost


Posted By: MES Pod
Date Posted: 10 Jun 2018 at 7:05pm
Our dealer was saying that drilling would void the warranty but did not offer to sell us any other setup. we towed or 178 for 3 years with our Ranger with no problems. what do others think drill or not? everything I have read said you use the sway control. thanks for the replys all.

-------------
Ricky & Barbara
2021 Ford F-150, 2018 Pod 180


Posted By: GlueGuy
Date Posted: 11 Jun 2018 at 11:02am
Originally posted by MES Pod

Our dealer was saying that drilling would void the warranty but did not offer to sell us any other setup. we towed or 178 for 3 years with our Ranger with no problems. what do others think drill or not? everything I have read said you use the sway control. thanks for the replys all.
I personally would not want to drill in that part of the frame. The zone between the hitch and the body is probably the highest stressed part of the frame. All the WDH setups that I have seen clamp onto the outside of the frame, and I think there is good reasoning behind that.


-------------
bp
2017 R-Pod 179 Hood River
2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost


Posted By: DavMar
Date Posted: 12 Jun 2018 at 5:46pm
I'm with Tars Tarkas, I too have never heard of any WDH voiding the warranty nor do I know of any that you have to drill or weld on the trailer frame but there maybe some? If you have any doubt about your warranty contact the Forest River Rpod warranty representative by email phone and ask them directly. IMHO your dealer was feeding you a line of bull hockey to put it politely.

-------------
Dave & Marlene J with Zoey the
wonder dog.
2017 Rpod 180
2016 Toyota Tacoma SR5 4x4
Lexington, NC


Posted By: MES Pod
Date Posted: 13 Jun 2018 at 7:37pm
Thanks all for the replies, I think I will purchase the E2 10,000lbs unit, anybody use them? offer any reviews.

-------------
Ricky & Barbara
2021 Ford F-150, 2018 Pod 180


Posted By: lostagain
Date Posted: 13 Jun 2018 at 8:38pm
The E2 6K unit needs no holes in the frame of the trailer.  All is clamp on.  You just have to be sure to torque the nuts to their specs.  Dealers may or may not check the torque with their installation.  Best to ask, indeed, put it in writing on the repair or sales order.

-------------
Never leave footprints behind.
Fred & Maria Kearney
Sonoma 167RB
Our Pod 172
2019 Ford F-150 4x4 2.7 EcoBoost


Posted By: GlueGuy
Date Posted: 14 Jun 2018 at 10:16am
Originally posted by MES Pod

Thanks all for the replies, I think I will purchase the E2 10,000lbs unit, anybody use them? offer any reviews.
That is probably overkill for an R-pod. Most everyone that I know uses the 600/6000 E2 unit. I don't know what the effects would be with a "too heavy" unit except that it might be difficult to get it dialed in.


-------------
bp
2017 R-Pod 179 Hood River
2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost


Posted By: MES Pod
Date Posted: 15 Jun 2018 at 9:20pm
Thanks all, we purchased the 94-00-0600 6000lbs unit from Amazon tonight.

-------------
Ricky & Barbara
2021 Ford F-150, 2018 Pod 180


Posted By: IronStinky
Date Posted: 02 Jul 2018 at 12:33pm
My understanding was that being "over distributed" was just as bad as being "under distributed". I talked to etrailer.com and Fastway and they both said the 600 was the right one for the R-pod, the 1000 is too much.


Posted By: Presitla99
Date Posted: 19 Jul 2018 at 9:05pm
I tow with an Equalizer hitch that clamps on. 600 lb bars.   No warranty issues can be raised since no frame drilling. No sway and distributes weight nicely. 


Posted By: poodlemom1367
Date Posted: 21 Jul 2018 at 9:22am
Hi there, I'm new to the forum and Rpods but have had trailers in the past. I just purchased a 180 also out here in the Portland OR area and the dealer said I SHOULD have sway bars set up as part of my hitch because of the high winds we sometimes get in the Columbia Gorge for example but also on I5 freeway. Did the dealer mean because they were old or not the right kind they could void the warranty? That's the only thing I can think of that might make sense...

-------------
Beth S
Rpod 180, Toyota Highlander


Posted By: Tars Tarkas
Date Posted: 21 Jul 2018 at 10:06am
I bought my Pod used so I never had a warranty, but I'm pretty sure the issue is that for some weight distributing hitches and/or sway bars, one has to drill or weld the frame of the trailer.  I can believe that could be the warranty issue and it's probably what was meant.

The Equilizer WDH doesn't require drilling or welding, thereby getting around the issue.  The Fastway I have is very similar.  They both provide very good sway control in addition to weight distribution.

TT


-------------
2010 176
FJ Cruiser



Print Page | Close Window

Bulletin Board Software by Web Wiz Forums® version 9.64 - http://www.webwizforums.com
Copyright ©2001-2009 Web Wiz - http://www.webwizguide.com