Yellow Stains/Streaks From Decal Adhesive
Printed From: R-pod Owners Forum
Category: Non-pod Discussion Forums
Forum Name: Mods, Maintenance, Tips and Tricks
Forum Discription: Same as podmods, just... not for pods
URL: http://www.rpod-owners.com/forum_posts.asp?TID=11475
Printed Date: 03 May 2024 at 9:12pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com
Topic: Yellow Stains/Streaks From Decal Adhesive
Posted By: MTB Couple
Subject: Yellow Stains/Streaks From Decal Adhesive
Date Posted: 26 Apr 2018 at 11:25am
|
My husband I and noticed yellow stains/streaks on our pod that ran down from the decals. We figured perhaps too much adhesive had been used when applying the decals, so we tried Goof Off, but that didn't work. I decided to try a little bit of Comet with bleach. I tested it on a small inconspicuous spot and it worked! I created a thick paste by mixing the Comet with a little water and I used a medium bristled brush to apply the paste in a circular motion. It didn't require a lot of elbow grease at all, the stains just came right off. I hope this can help someone else! :-)
|
Replies:
Posted By: lostagain
Date Posted: 26 Apr 2018 at 2:16pm
|
MTB you can damage the gelcoat with abrasive cleansers, like Comet. It works really well getting stuff off because it takes off some of the gelcoat with it and you will find that the sheen on the gelcoat will be gone. Use a boat cleaner or soft rubbing compound to clean stubborn stains, then wax over what you cleaned or the stains will quickly return. There are many products specifically designed to clean fiberglass surfaces in RV shops or marine supply stores. ------------- Never leave footprints behind. Fred & Maria Kearney Sonoma 167RB Our Pod 172 2019 Ford F-150 4x4 2.7 EcoBoost |
Posted By: jato
Date Posted: 26 Apr 2018 at 5:06pm
|
We have had good success using a clay bar (fine grit), because it is so fine it does take a bit of elbow grease but have never damaged the finish by using it. Our 177 is just over 7 years old, still looks great.
------------- God's pod '11 model 177 '17 Ford F-150 4WD 3.5 Ecoboost Jim and Diane by beautiful Torch Lake "...and you will know the Truth and the Truth will set you free." |
Posted By: DavMar
Date Posted: 05 May 2018 at 7:53pm
Never thought of a clay bar but that's a good suggestion Leo +1 Though here is a tough one I'd like to find an answer for as to cleaning the outside of my Pod. Where it parks there is a Maple tree that partly shades it and in turn leaves little black sap specks all over the Pod. Since my tree hugging wife won't allow me to put chain saw to tree does anyone have a suggestion for a quick and easy product I can use to remove this sap spots???? ------------- Dave & Marlene J with Zoey the wonder dog. 2017 Rpod 180 2016 Toyota Tacoma SR5 4x4 Lexington, NC |
Posted By: jato
Date Posted: 05 May 2018 at 8:24pm
|
Maybe hire a neighbor with a chain saw and . . . .? Anyway I have used a product by Blue Magic called "Road Tar & Bug Gel that works fairly well and one better than that as one time we were under a white pine that had terrible sap drip all over the roof of our pod as well as our Explorer is produced by Guardsman called "Goof Off" it worked well but also took a bit of elbow grease to get the tar off. Put product on rag and rub over the spot. Would also highly recommend a good wax job after doing this to put a coating over the gel coat. I have used a product by MeGuiars called Ultimate liquid wax, leaves the finish baby butt smooth. ------------- God's pod '11 model 177 '17 Ford F-150 4WD 3.5 Ecoboost Jim and Diane by beautiful Torch Lake "...and you will know the Truth and the Truth will set you free." |
Posted By: DavMar
Date Posted: 05 May 2018 at 8:29pm
|
Thanks jato! I'll take a look and see if I can find this Blue Magic Road Tar & Bug Gel st my local FLAP (friendly neighborhood auto parts) of course if you want to come South with your chainsaw I'd be most appreciative!  ------------- Dave & Marlene J with Zoey the wonder dog. 2017 Rpod 180 2016 Toyota Tacoma SR5 4x4 Lexington, NC |