Print Page | Close Window

DVD not working

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=10092
Printed Date: 23 May 2025 at 11:12pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com


Topic: DVD not working
Posted By: Madmojo
Subject: DVD not working
Date Posted: 02 Jun 2017 at 8:23pm
We tried to use the dvd player in our 2017 176 and it kept spitting the dvd back out.  ANyone else have an issue?



Replies:
Posted By: mcarter
Date Posted: 03 Jun 2017 at 8:31am
Never had the issue in Pod. But have had issues with drives in past. Does it attempt to spin (read) then eject or just eject no spin. You could try a discwasher disc the unit may be dirty or have an obstruction. Sounds like it is new, did it ever work?

-------------
Mike Carter
2015 178
" I had the right to remain silent, I just didn't have the ability."


Posted By: furpod
Date Posted: 03 Jun 2017 at 2:54pm
Was it a blue ray? Can't read those and will spit them out.

-------------


Posted By: Madmojo
Date Posted: 04 Jun 2017 at 8:18am
It is brand new r pod.  When you put in the disk it does not sound like it is spinning after a few seconds it ejects the disc.  I have read that there is a transport screw in the back that needs to be removed. It should of been removed during installation.

Just a dvd not a blueray



Posted By: furpod
Date Posted: 04 Jun 2017 at 11:57am
check the screw then.. only 4 screws hold the unit in the wall..



-------------


Posted By: mcarter
Date Posted: 04 Jun 2017 at 4:10pm
Still not clear - did it ever work?

-------------
Mike Carter
2015 178
" I had the right to remain silent, I just didn't have the ability."


Posted By: ozon8r
Date Posted: 14 Jun 2017 at 8:46am
I had the same issue. Removed the unit from the wall (four screws). Then removed the screw on top that says something like "remove screw before installing". Solved my issue of spitting out the disc.


Posted By: GlueGuy
Date Posted: 14 Jun 2017 at 9:09am
Originally posted by ozon8r

I had the same issue. Removed the unit from the wall (four screws). Then removed the screw on top that says something like "remove screw before installing". Solved my issue of spitting out the disc.
Sounds like Jimmie on the production line was taking a lunch break?  Wacko

-------------
bp
2017 R-Pod 179 Hood River
2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost


Posted By: GLBCamper
Date Posted: 14 Jun 2017 at 9:26am
Originally posted by ozon8r

I had the same issue. Removed the unit from the wall (four screws). Then removed the screw on top that says something like "remove screw before installing". Solved my issue of spitting out the disc.

+1.  Remove the faceplate. You'll see the sticker that says to remove this screw. Works perfectly. Easy peasy.


-------------
Old: 2014 177 HRE
2015 Tacoma V6 4x4 Double Cab
New: 2016 EVO ATS 200rd
2016 F150 4x4 Sport


Posted By: Madmojo
Date Posted: 14 Jun 2017 at 7:54pm
I took out the unit from the wall and there was the RED sticker to remove the transport screw before installation.  I removed the screw and now it works.  It looks like many have had the same problem.  If only the factory workers could follow instructions.Confused


Posted By: GLBCamper
Date Posted: 14 Jun 2017 at 8:37pm
I could be wrong but I think this is a dealer prep item.

-------------
Old: 2014 177 HRE
2015 Tacoma V6 4x4 Double Cab
New: 2016 EVO ATS 200rd
2016 F150 4x4 Sport



Print Page | Close Window

Bulletin Board Software by Web Wiz Forums® version 9.64 - http://www.webwizforums.com
Copyright ©2001-2009 Web Wiz - http://www.webwizguide.com