![]() |
|
Post Reply ![]() |
Page <12 |
Author | |
Pod People ![]() Senior Member ![]() Joined: 22 Sep 2011 Location: Chapel Hill,NC Online Status: Offline Posts: 1088 |
![]() Posted: 13 Oct 2019 at 6:05pm |
I started the earlier mention of using a cooler. Olddawgsrule is correct --insulation is the key. I said that we used a quality cooler-it is an Engel , but the best part is that I made an insulated cover for it. I used REflectix roll insulation https://www.lowes.com/pd/Reflectix-R-21-33-3-sq-ft-Unfaced-Reflective-Roll-Insulation-16-in-W-x-25-ft-L/1014123 which is available at Lowe's. It is 1/4" bubble wrap that is faced with reflective foil. I used three thickness of the wrap. Lowe's also has a special foil tape for joints at the seams. The top can be taken off and leave the bottom in place. We have kept ice as long as 9 days-we freeze it in gallon jugs and put i jug at each end. Makes good cold drinking water also. hope this helps Vann |
|
![]() |
|
lostagain ![]() Senior Member ![]() ![]() Joined: 06 Sep 2016 Location: Quaker Hill, CT Online Status: Offline Posts: 2595 |
![]() |
A couple years ago we bought a Lifetime 55 quart ice chest to take on a trip to AZ anticipating boondocking for most of the trip. Though we didn't really boondock as much as we anticipated due to our friends' camping preferences, I really appreciated the cooler. I have put drinks and ice blocks in it and it keeps everything nice and cold for a surprisingly long time. I usually fill big Costco plastic jars, like for nuts, with water and freeze it. I've had that ice stick around for as long as a week.
The ices chest performs every bit as well as the high priced brands that cost over $200 or $300. Here's a link I found for it today. https://sunnypetra.com/index.php/lifetime-55-quart-high-performance-cooler-grey.html?utm_campaign=gs-2019-07-05&utm_source=google&utm_medium=smart_campaign Lifetime products, if I'm not mistaken, are made in Utah, which I think is still part of the USA.
|
|
Never leave footprints behind.
Fred & Maria Kearney Sonoma 167RB Our Pod 172 2019 Ford F-150 4x4 2.7 EcoBoost |
|
![]() |
|
offgrid ![]() Senior Member ![]() Joined: 23 Jul 2018 Online Status: Offline Posts: 5290 |
![]() |
If you want to add insulation to a cooler or refrigerator then its best to use a high r value foam insulation material like polyurethane and make it as thick as you have space for. The Reflectix type materials' insulation values are highly overrated for this kind of application because they depend on reducing radiation losses across a dead air cavity like an attic space. You don't have a cavity like that in a fridge or a cooler.
So Reflectix foam is only about R 3 per inch and its about 1/3 inch thick so around R 3 for three wraps. Closed cell urethane is about R 6 per inch so a 2 inch space would give you R 12. To get that you can buy a cooler which already has 2 inches or more of foam in it. Ignore the fancy brand name, look for the foam, and don't forget to check that the lid also contains foam. Or, here's a DIY way to do it ![]() https://www.youtube.com/watch?v=zC7UcJZFZvk When it comes to insulation, like they say in the automotive world, there ain't no substitute for cubic inches. |
|
1994 Chinook Concourse
1995 RV6A Experimental Aircraft 2015 Rpod 179 - sold |
|
![]() |
Post Reply ![]() |
Page <12 |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |