ouR escaPOD mods

We will have an issue in the future. My wife just started using oxygen at night. We will need to figure out how to power an oxygen concentrator. That will likely be a modification to come.

As for the tires, get them balanced if they were not done so already. Also, check that there is not excessive camber (tires leaning in or out). Also, check the inflation to make sure it is up to specification for your tires. The wear pattern will help you diagnose what is happening. If the wear is in the middle but the edges are okay, then it might be overinflated. If it is on both edges, but the center is okay, it might be underinflated. If the wear is on the inside or outside edge, but the rest is okay, then look at the camber. If it is scalloped, then have the tires balanced and/or check the brakes for drag. If the brakes lock up, it will put a flat spot on the tire. Last, check the bearings in the hubs. If they are too loose, the wheel and tire may be moving in ways that they are not supposed to .

Also, do a search of the forum. Advanced search is your friend. With it, you can search older posts. The default is to only search those newer than 6 months. With advanced search, you can search any date and be more likely to find help.

I know this is long after the fact, but I don't remember if I answered your question. It is likely moot though since the restrictions have been lifted.

If you look at Chris Cancilla's site, W4CEC.com, you will find out information there. Another is Five County Ham Radio Enthusiasts. Both are Laurel VEC teams and thus do not charge a fee for testing, unlike some of the others.