Axle Risers |
Post Reply | Page 12> |
Author | |
HongsterRP
Newbie Joined: 04 Dec 2013 Location: In the Wood Online Status: Offline Posts: 19 |
Topic: Axle Risers Posted: 27 Apr 2014 at 10:59am |
Folks,
I would like to get the kit. I have been searching but failed. Can anyone here tell me who and where to get them? Thank you..
|
|
Markie
Groupie Joined: 22 Sep 2013 Location: Chambersburg PA Online Status: Offline Posts: 67 |
Posted: 27 Apr 2014 at 2:42pm |
Risers and
hardware are available at Forest River for $150. Call 574-642-3119, leave a message and someone will return your call for shipping address, payment etc. I installed my risers last fall with no problems although I do recommend a pneumatic impact wrench rather than breaker bar to remove bolts. There are some good instructions on the forum to install the risers once you have them. If you like I can send you my step by step instructions. Mark |
|
Mark & Vicki
R-POD 178 & 2015 Silverado 5.3L Weimeraner "Zeke" |
|
HongsterRP
Newbie Joined: 04 Dec 2013 Location: In the Wood Online Status: Offline Posts: 19 |
Posted: 27 Apr 2014 at 5:33pm |
Thank you Markie
I will give that number a call. Instruction? What's that?
|
|
Budward
Senior Member Joined: 21 Apr 2014 Location: SC/NC Online Status: Offline Posts: 438 |
Posted: 27 Apr 2014 at 7:53pm |
Some if not all new r-pods are coming with Dexter axles. Dexter has dealers all over that sell or can get, their riser kit.
|
|
HongsterRP
Newbie Joined: 04 Dec 2013 Location: In the Wood Online Status: Offline Posts: 19 |
Posted: 27 Apr 2014 at 9:40pm |
Is this the kit I need? http://dexteraxle.com/inc/sdetail/45177/50968
|
|
Seanl
Senior Member Joined: 19 Sep 2011 Location: Fredericton NB Online Status: Offline Posts: 633 |
Posted: 28 Apr 2014 at 12:40pm |
I installed my own nothing to it really with an impact wrench and a jack. The bolts that come with the kit are single use. The nuts have a burr on them that stops them form comming off. This makes them hard to tighten without a power impact wrench. Mine is electric but pnumatic would work to. |
|
Sean, 2011 Rpod RP-173,2009 Jeep Liberty Rocky Mountain Edition
|
|
HongsterRP
Newbie Joined: 04 Dec 2013 Location: In the Wood Online Status: Offline Posts: 19 |
Posted: 28 Apr 2014 at 4:16pm |
[/QUOTE] I installed my own nothing to it really with an impact wrench and a jack. The bolts that come with the kit are single use. The nuts have a burr on them that stops them form comming off. This makes them hard to tighten without a power impact wrench. Mine is electric but pnumatic would work to. [/QUOTE]
Yes, that is what I thought. Thanks for chime in. Can I ask where did you get your risers? TIA..
|
|
Julia1961
Newbie Joined: 23 Aug 2013 Location: Florida Online Status: Offline Posts: 29 |
Posted: 15 Aug 2014 at 11:29pm |
I am looking for someone to install risers to my rpod 173 I live in Jax fl can you suggest anyone? I originally purchased my rpod from rivers RV her in Jax but they had some one buy then out and are not that familiar enough with this that I trust them. Any suggestions will be appreciated. Just an FYI I also want to pay someone to put a window in my door and also add an electronic lock.
Thanks Julia
|
|
The Vintage Glamper
Lilly Pod |
|
Craneman
Senior Member Joined: 12 May 2013 Location: Tokeland,wa Online Status: Offline Posts: 387 |
Posted: 16 Aug 2014 at 9:22am |
I got my risers from FR for 150.00$ and installed myself. I didn't use air wrenches just a 1/2 in ratchet and hand wrench no problems at all.about two hours cause I'm sloww.
Moe
|
|
Jo and Gary, 2010-174,2011 F150
Jo and Gary 2010 174 2011 Ford 150 |
|
HongsterRP
Newbie Joined: 04 Dec 2013 Location: In the Wood Online Status: Offline Posts: 19 |
Posted: 16 Aug 2014 at 10:42am |
Nice! Thank you for the info. I'm having second thought. I might not even doing this upgrade. It has been fine w/o it.
|
|
Post Reply | Page 12> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |