![]() |
|
Post Reply ![]() |
Page 12> |
Author | |
Batwing ![]() Newbie ![]() Joined: 14 Dec 2018 Online Status: Offline Posts: 4 |
![]() Posted: 15 Dec 2018 at 8:03am |
I saw pics of a round antenna that was used to replace the junk batwing in a 2015 179 , can u tell me which antenna was used? I would like to reuse the base without drilling any holes . Thx
|
|
![]() |
|
mcarter ![]() podders Helping podders - pHp ![]() ![]() Joined: 07 Apr 2016 Location: Greenbrier, TN Online Status: Offline Posts: 3419 |
![]() |
Are you talking about an antenna FR mounted or an antenna an owner added? RPods were modified with King Jacks in 2016, I believe they were direction and the mount would require modification.
|
|
Mike Carter
2015 178 " I had the right to remain silent, I just didn't have the ability." |
|
![]() |
|
Batwing ![]() Newbie ![]() Joined: 14 Dec 2018 Online Status: Offline Posts: 4 |
![]() |
It was a modification by an rood owner
|
|
![]() |
|
Batwing ![]() Newbie ![]() Joined: 14 Dec 2018 Online Status: Offline Posts: 4 |
![]() |
R-pod
|
|
![]() |
|
mcarter ![]() podders Helping podders - pHp ![]() ![]() Joined: 07 Apr 2016 Location: Greenbrier, TN Online Status: Offline Posts: 3419 |
![]() |
Hard to tell, may have been a Wineguard, dome shaped, or hamburger bun shaped:)
|
|
Mike Carter
2015 178 " I had the right to remain silent, I just didn't have the ability." |
|
![]() |
|
StephenH ![]() podders Helping podders - pHp ![]() ![]() Joined: 29 Nov 2015 Location: Wake Forest, NC Online Status: Offline Posts: 6417 |
![]() |
This post has the link for the one I used: http://www.rpod-owners.com/forum_posts.asp?TID=7712&PID=107696&title=our-escapod-mods#107696, however, the one I used is not currently available. This one looks to be similar: https://www.amazon.com/dp/B00USE3JF6/ However, the attachment to the mast section seems to be by some sort of clip-in instead of the bolts the original antenna and the one I purchased used. The big advantage is in not having the batwings to catch things. It also does not rattle in the wind.
|
|
StephenH
Happy is the man that findeth wisdom,... ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
|
![]() |
|
Batwing ![]() Newbie ![]() Joined: 14 Dec 2018 Online Status: Offline Posts: 4 |
![]() |
![]() |
|
![]() |
|
GlueGuy ![]() Senior Member ![]() ![]() Joined: 15 May 2017 Location: N. California Online Status: Offline Posts: 2702 |
![]() |
|
|
bp
2017 R-Pod 179 Hood River 2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost |
|
![]() |
|
StephenH ![]() podders Helping podders - pHp ![]() ![]() Joined: 29 Nov 2015 Location: Wake Forest, NC Online Status: Offline Posts: 6417 |
![]() |
For me it does seem to work better than the batwing antenna. I think this is mainly because the diameter of the flying saucer is larger than the circular center of the batwing antenna. Both are omnidirectional. A lot depends on what is available nearby. In urban or suburban areas, there are usually sufficient stations nearby so that one can get reception. OTOH, when we have been traveling out west, we were often way too far from any transmitters to get reception. The one thing we can't do is raise the antenna. That would help but I wouldn't want a mast pole sticking through the wardrobe in our R-Pod to accomplish it.
|
|
StephenH
Happy is the man that findeth wisdom,... ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
|
![]() |
|
TheBum ![]() Senior Member ![]() Joined: 26 Feb 2016 Location: Texas Online Status: Offline Posts: 1407 |
![]() |
I have a King Jack antenna ready to go in our 2016 179 to replace the batwing. I've been kicking around ideas for bringing the rotation mechanism and signal strength meter down through the top of the wardrobe and forward, but haven't come up with a good solution yet. I may use timing belts and toothed pulleys.
|
|
Alan
2022 R-Pod 196 "RaptoRPod" 2022 Ram 1500 Lone Star 4x4 Three cats |
|
![]() |
Post Reply ![]() |
Page 12> |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |