Bike Rack Option Photos |
Post Reply | Page 123 4> |
Author | |
PilotPodder
Senior Member Joined: 04 May 2016 Location: Portage, MI Online Status: Offline Posts: 305 |
Topic: Bike Rack Option Photos Posted: 09 Aug 2018 at 8:16pm |
Fellow Podders, 1. Hitch and bike rack on the front of the Tow Vehicle 2. Bike(s) on top of tow vehicle (rails/rack on roof) 3. Bike(s) above truck bed (rails and rack above bed cover) 4. Bike(s) inside the Tow Vehicle or in truck bed 5. Bike(s) on hitch extender near tailgate 6. Bike(s) on riser and bike rack on A-Frame (above propane tank and battery) 7. Bike(s) inside trailer (tied down inside R-Pod) I already have pics of bikes on back of my R-Pod on the hitch where the spare tire goes. If you are so inclined, and would be willing to allow me to use the photo in an upcoming video, please Private Message me and I'll get you my email. I can't promise I'll use every photo I get, but any help is appreciated. ~PP
|
|
Portage, MI — 2017 RPod 179 - sold / 2017 Toyota Tundra — My RPod YouTube Videos
|
|
lostagain
Senior Member Joined: 06 Sep 2016 Location: Quaker Hill, CT Online Status: Offline Posts: 2586 |
Posted: 09 Aug 2018 at 10:18pm |
We got a 2 bike rack that fits into the 1 1/4" receiver that holds the spare. I tried mounting the spare on the tongue but found that in backing the truck comes in contact with the tire on a sharp turn. So, rather than spend more money, I'm going to throw the spare in the back of the truck along with all the other stuff there, since there is plenty or room. The bike rack and bikes weighs about the same as the spare, so the receiver should be fine.
|
|
Never leave footprints behind.
Fred & Maria Kearney Sonoma 167RB Our Pod 172 2019 Ford F-150 4x4 2.7 EcoBoost |
|
Leo B
podders Helping podders - pHp Joined: 13 Jan 2012 Location: Lyndonville, VT Online Status: Offline Posts: 4508 |
Posted: 10 Aug 2018 at 8:25am |
We just got one of the Jack-it bike carriers, works great so far! Easy to install.
|
|
Leo & Melissa Bachand
2017 Ford F150 2021 Vista Cruiser 19 csk Previously owned 2015 Rpod 179 2010 Rpod 171 |
|
Leo B
podders Helping podders - pHp Joined: 13 Jan 2012 Location: Lyndonville, VT Online Status: Offline Posts: 4508 |
Posted: 10 Aug 2018 at 8:38am |
https://www.lci1.com/jack-it
|
|
Leo & Melissa Bachand
2017 Ford F150 2021 Vista Cruiser 19 csk Previously owned 2015 Rpod 179 2010 Rpod 171 |
|
lostagain
Senior Member Joined: 06 Sep 2016 Location: Quaker Hill, CT Online Status: Offline Posts: 2586 |
Posted: 10 Aug 2018 at 9:36am |
That's a pretty cool rack, Leo. Is it sturdy enough to take what looks like quite a bit of leverage working on the welds?
|
|
Never leave footprints behind.
Fred & Maria Kearney Sonoma 167RB Our Pod 172 2019 Ford F-150 4x4 2.7 EcoBoost |
|
PilotPodder
Senior Member Joined: 04 May 2016 Location: Portage, MI Online Status: Offline Posts: 305 |
Posted: 10 Aug 2018 at 9:40am |
Leo, if you have a good photo with your bikes loaded, let me know and I can PM you my email.
|
|
Portage, MI — 2017 RPod 179 - sold / 2017 Toyota Tundra — My RPod YouTube Videos
|
|
Leo B
podders Helping podders - pHp Joined: 13 Jan 2012 Location: Lyndonville, VT Online Status: Offline Posts: 4508 |
Posted: 10 Aug 2018 at 10:23am |
So far it has been really good. I had that concern and check after trips. So far so good.
Will get some pictures and let you know. |
|
Leo & Melissa Bachand
2017 Ford F150 2021 Vista Cruiser 19 csk Previously owned 2015 Rpod 179 2010 Rpod 171 |
|
Pod People
Senior Member Joined: 22 Sep 2011 Location: Chapel Hill,NC Online Status: Offline Posts: 1065 |
Posted: 10 Aug 2018 at 11:23am |
We moved the spare tire to the A frame so that we could carry our
bikes on the rear. While at the welder’s shop, we had a 2” receiver added to
the existing 1 ¼” receiver. We also
welded a new 2”x2” frame member going across the width of the pod from side frame to side frame to anchor the
back end of the 2” receiver with a piece of angle iron. When we carry the bikes, we use 2 ratchet
straps that go from the bike rack down to each corner of the frame for
stability. We also use a hitch
tightner. The combination of all of
these modifications results in a very tight, completely stable bike rack. Vann |
|
furpod
Moderator Group - pHp Joined: 25 Jul 2011 Location: Central KY Online Status: Offline Posts: 6128 |
Posted: 10 Aug 2018 at 3:49pm |
Keith-N-Dar
podders Helping podders - pHp Joined: 03 Apr 2011 Location: Mayville, WI Online Status: Offline Posts: 1447 |
Posted: 10 Aug 2018 at 4:35pm |
Pod People, I will be ignoring your photos since I cnt get them without tasteless adds.
|
|
Keith-N-Dar
Boris & Betty (Boston Terriers) 2011 R-Pod 177 2010 Ford F-150 |
|
Post Reply | Page 123 4> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |