Black Tank Pipe Hanger Broke |
Post Reply | Page 123> |
Author | |
Shane
podders Helping podders - pHp Joined: 09 Sep 2018 Location: Northern IL. Online Status: Offline Posts: 98 |
Topic: Black Tank Pipe Hanger Broke Posted: 08 Mar 2021 at 10:47am |
I think I have read something about Forest River doing a recall on this issue sometime this year. this seems to be a huge problem!
|
|
ENGINE 55,TRUCK 44,BATALLION 12
|
|
Podman
Newbie Joined: 21 Feb 2021 Location: California Online Status: Offline Posts: 3 |
Posted: 25 Feb 2021 at 3:24pm |
I replaced my valve and coupling, plus a foot plus of pipe
|
|
StephenH
podders Helping podders - pHp Joined: 29 Nov 2015 Location: Wake Forest, NC Online Status: Offline Posts: 6288 |
Posted: 25 Feb 2021 at 12:25pm |
The biggest problem with the hanger is the weight of the black water pipe when it is full. That tube has some weight bouncing up and down. If the valve had been installed right as the pipe exits the tank with an extension handle, then the pipe would ordinarily be empty unless the valve were leaking. The pipe would be much lighter and the original style hanger might have been sufficient. I'm surprised it took this long for a recall to happen. Too bad it doesn't include all RPod models that have exhibited this problem, to include my 2016 RP179 which had the hanger fail twice before I made my own hanger.
|
|
StephenH
Happy is the man that findeth wisdom,... ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
|
mjlrpod
Senior Member Joined: 27 Sep 2016 Location: Massachusetts Online Status: Offline Posts: 1214 |
Posted: 25 Feb 2021 at 12:06pm |
Did you replace the whole unit? As in, nothing but a straight pipe was coming out? or did you just replace the actual sling mechinism? If you replaced the entire unit, do you have to cut them off?
|
|
2017.5 Rp-172
2020 R-pod 195 2015 Frontier sv 4.0L 6cyl I'll be rpodding |
|
StephenH
podders Helping podders - pHp Joined: 29 Nov 2015 Location: Wake Forest, NC Online Status: Offline Posts: 6288 |
Posted: 25 Feb 2021 at 8:40am |
Okay. Thanks. I don't have the capability to weld stainless steel. I have a Harbor Freight welder that uses flux-core wire. It works okay on regular steel, but won't work on stainless steel since there is no way to connect up shielding gas.
|
|
StephenH
Happy is the man that findeth wisdom,... ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
|
Toyanvil
Senior Member Joined: 15 Feb 2019 Location: Bakersfield Online Status: Offline Posts: 157 |
Posted: 25 Feb 2021 at 8:13am |
It's welded.
|
|
Gebaldwin1
Newbie Joined: 14 May 2017 Location: CT Online Status: Offline Posts: 23 |
Posted: 25 Feb 2021 at 6:11am |
I have a 2017 180 that I had to redo the hanging bracket on. There is a recall on 2018-20 models.
|
|
GMan
Lil' Bumpy - RPod 180 |
|
Podman
Newbie Joined: 21 Feb 2021 Location: California Online Status: Offline Posts: 3 |
Posted: 25 Feb 2021 at 12:08am |
Yes that is a very nice bracket, replacing or fortifying the lousy factory bracket is mandatory. This is one of those cases where not fixing unless it’s broke doesn’t apply.
|
|
StephenH
podders Helping podders - pHp Joined: 29 Nov 2015 Location: Wake Forest, NC Online Status: Offline Posts: 6288 |
Posted: 24 Feb 2021 at 10:48pm |
How is the flat part attached to the round rod? Is it welded? It looks great. I have not had any problems either since changing the cheap hanger for my homemade one. Yours looks a lot nicer though.
|
|
StephenH
Happy is the man that findeth wisdom,... ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
|
Toyanvil
Senior Member Joined: 15 Feb 2019 Location: Bakersfield Online Status: Offline Posts: 157 |
Posted: 24 Feb 2021 at 8:49am |
I just built this out of stainless steel for mine.
|
|
Post Reply | Page 123> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |