We're some hours west of you in Concord. Just got our 179 this past March and winterized it a few weeks ago. As was already mentioned, there are a few fellow podders who have graciously made videos on how to winterize the pod on Youtube. There are a few checklist here on the forum. Took me about an hour being my first time. The hardest part is accessing the water pump and heater valves. It's under the bed, under the thin plywood. The big pieces are a little awkward to move around. After that it's relatively easy. Buy or borrow a 1-1/16" socket to remove the anode rod from the water heater and drain/rinse it. You can either blow out the lines with compressed air and/or pump RV antifreeze through the system. Not difficult.