![]() |
|
Post Reply ![]() |
Page 12> |
Author | |
fwunder ![]() Senior Member ![]() ![]() Joined: 04 Oct 2013 Location: New Jersey Online Status: Offline Posts: 1676 |
![]() Posted: 21 Jun 2017 at 10:07pm |
As soon as this arrives, you can have my 178 RDome! Big enough for billiard table, lap pool and wet bar! Yeah, we're camping now!
![]() ![]() |
|
2014 RPod 178 => MyMods and Buying Habits
2008 4Runner Limited 4.0-liter V6 Yes, those are wild ponies dining on grass while dumping tanks! |
|
![]() |
|
edistolady ![]() Newbie ![]() ![]() Joined: 29 Apr 2017 Location: South Carolina Online Status: Offline Posts: 10 |
![]() |
I'm taking the rPod, rDome, & my sister & 2 dogs(small) on our first trip 6-29 to 7-3...wish us loads of luck....
|
|
GaMa on daRiva
|
|
![]() |
|
3Peas ![]() Newbie ![]() ![]() Joined: 16 May 2017 Online Status: Offline Posts: 15 |
![]() |
Found a used RDome. Yea. Now to use it for the first time. These tips are so useful. Thx all.
|
|
3Peas =
(Me + my 2 Camping Collies in a 178 Pod.) Knoxville, TN 2011 Honda Pilot |
|
![]() |
|
ozon8r ![]() Newbie ![]() Joined: 08 May 2016 Location: Denver Online Status: Offline Posts: 23 |
![]() |
I had the same issue. Very difficult to pull through, hanging on the screws holding the track to the rpod and then coming completely out of the track as if the open of the track was too wide. While I didn't replace the screws with flat head screws(GREAT IDEA), I pinched the track about every 12" and applied silicon to the inside of the track. Now it is sooo simple to install the R-Dome. I do occasionally hang on the track screws, but outward force at the point of the screw solves that problem.
I have noticed each time I install the R-Dome, that the track scrapes off slivers of the plastic from the piece that goes into the track. So, yesterday, I took a file to both ends of the rack and smoothed so it wasn't so rough. |
|
![]() |
|
edistolady ![]() Newbie ![]() ![]() Joined: 29 Apr 2017 Location: South Carolina Online Status: Offline Posts: 10 |
![]() |
An update on the rDome..I went hunting around this forum and found a smart guy that actually did what I thought of doing...da..change out the screws in the rail..flathead stainless..I did so as well and everything is going on smooth as silk..
|
|
GaMa on daRiva
|
|
![]() |
|
Craneman ![]() Senior Member ![]() Joined: 12 May 2013 Location: Tokeland,wa Online Status: Offline Posts: 387 |
![]() |
Here is what I did, I used 2 battery operated drills and put a Phillips bit in one and a drill bit to enlarge the tapered hole. First removed the screw with the phillips then used to other drill with a small bit to enlarge the tapered hole until the screw goes in almost flush, goes fast
Moe
|
|
Jo and Gary, 2010-174,2011 F150
Jo and Gary 2010 174 2011 Ford 150 |
|
![]() |
|
3Peas ![]() Newbie ![]() ![]() Joined: 16 May 2017 Online Status: Offline Posts: 15 |
![]() |
Have only been here 3 months. Lived in NC for 30 years before coming to K'ville to be with family and retire. I don' t like I-40 running right through everything. And no downtown out here in Farragut/suburbia on the West side of Knoxville. But I have barely begun to have time to get out and about. Especially with finding a tow car and then the Pod. There seems to be a lot of things to do, though, and quite a bit of outdoor related activity. Housing is inexpensive, but sales taxes for cars, campers, etc. are out of site. Car insurance is high too. No state income taxes. No freezing cold or, to me worse, no constant dreary/cloudiness that MI seems to have. Loved the people and the scenery and the water in western MI. Glad I got to go to high school there. Go GH Buccaneers.
|
|
3Peas =
(Me + my 2 Camping Collies in a 178 Pod.) Knoxville, TN 2011 Honda Pilot |
|
![]() |
|
edistolady ![]() Newbie ![]() ![]() Joined: 29 Apr 2017 Location: South Carolina Online Status: Offline Posts: 10 |
![]() |
Computerfixitguy, could you please tell me the exact size of the screws so I can fetch some on my way home today,,
Thanks
|
|
GaMa on daRiva
|
|
![]() |
|
edistolady ![]() Newbie ![]() ![]() Joined: 29 Apr 2017 Location: South Carolina Online Status: Offline Posts: 10 |
![]() |
So it was not that hard to switch out the screws....
Thanks soooooo much will try tomorrow to accomplish same...
|
|
GaMa on daRiva
|
|
![]() |
|
computerfixitguy ![]() Groupie ![]() Joined: 04 Jun 2016 Location: Littleton, CO Online Status: Offline Posts: 91 |
![]() |
I not only put silicone spray in the track I replaced the screws with flatter ones that don't catch. RDome goes right in by myself. Love my R-Dome.
|
|
Kim & Derek
2016.5 176t 2015 Jeep Rubicon JKU (trips west) 2008 Town and Country (trips east) 2 kids, 2 dogs |
|
![]() |
Post Reply ![]() |
Page 12> |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |