Author |
Share Topic Topic Search Topic Options
|
GLBCamper
Senior Member
Joined: 30 Jun 2015
Location: Oregon
Online Status: Offline
Posts: 274
|
Topic: Furnace cycling Posted: 26 Oct 2015 at 12:59am |
Just got back from my first fall/cold weather weekend. I noticed that the furnace cycles off and on quite a bit, even when it has quite a bit of temp to gain (like from 40 degrees up to 65 degrees) It eventually gets there by cycling fan/blower/fan/off for a few minutes then repeat. Is that normal? My home furnace will not cycle off until the thermostat temp has been reached.
|
Old: 2014 177 HRE
2015 Tacoma V6 4x4 Double Cab
New: 2016 EVO ATS 200rd
2016 F150 4x4 Sport
|
 |
furpod
Moderator Group - pHp
Joined: 25 Jul 2011
Location: Central KY
Online Status: Offline
Posts: 6128
|
Posted: 26 Oct 2015 at 8:26am |
No, it's not normal. Ours will come on and run until happy. We normally just use a electric space heater when hook ups are available, but our gas heater pretty much runs like the heater at home, there is the issue of the heater being a bit large for the space, like the a/c, which could cause short cycling..
|
 |
hogone
Senior Member
Joined: 09 Apr 2013
Location: High Ridge, MO
Online Status: Offline
Posts: 1060
|
Posted: 26 Oct 2015 at 8:32am |
i actually noticed this on mine this weekend which i haven't noticed before. i was wondering the same thing when it happened. hogone
|
Jon & Pam
2013 RP177
2023 F150
2017 HD Streetglide
CHEESEHEAD
|
 |
pnwcamper
Newbie
Joined: 22 Sep 2015
Location: Oregon
Online Status: Offline
Posts: 38
|
Posted: 26 Oct 2015 at 10:42am |
I'm not sure this is the answer but here is what I have experienced.
I have noticed if my pod is cold (furnace has not been on) the furnace will cycle more in the beginning but once the camper heats up and everything is warm it cycles less.
Also, I assume the colder it is outside the more the furnace will cycle.
|
 |
SNO4ME
Senior Member
Joined: 28 Sep 2013
Location: NW Wis
Online Status: Offline
Posts: 122
|
Posted: 26 Oct 2015 at 10:56am |
Originally posted by pnwcamper
I'm not sure this is the answer but here is what I have experienced.
I have noticed if my pod is cold (furnace has not been on) the furnace will cycle more in the beginning but once the camper heats up and everything is warm it cycles less.
Also, I assume the colder it is outside the more the furnace will cycle.
|
We had that on a cool evening this fall. We were out by the fire kinda late and didn't turn the furnace on till we came. Should have turned it on a least an hour earlier to stabilize the temperature better. He he, oh are we a spoiled bunch of happy campers.
|
Bruce & Donna in the Sno Pod
(and Brewer too)
2011 RP 177
|
 |
SNO4ME
Senior Member
Joined: 28 Sep 2013
Location: NW Wis
Online Status: Offline
Posts: 122
|
Posted: 26 Oct 2015 at 11:00am |
Originally posted by pnwcamper
I'm not sure this is the answer but here is what I have experienced.
I have noticed if my pod is cold (furnace has not been on) the furnace will cycle more in the beginning but once the camper heats up and everything is warm it cycles less.
Also, I assume the colder it is outside the more the furnace will cycle.
|
Interesting article in the new Trailer Life magazine about the guy that spent the winter in his Pod in the Yukon. His furnace ran, A LOT!
|
Bruce & Donna in the Sno Pod
(and Brewer too)
2011 RP 177
|
 |
CharlieM
Senior Member
Joined: 23 Nov 2012
Location: N. Colorado
Online Status: Offline
Posts: 1797
|
Posted: 26 Oct 2015 at 6:29pm |
It's probably normal for the furnace to cycle more when the Pod is cold. The furnace will quickly heat the air and the thermostat will think it's warm. However, the walls etc. will still be cold. As soon as the blower stops the air around the thermostat will cool and the cycle begins anew. Eventually the walls etc. (and you) will warm and the thermostat will quit being so picky. The wonders of physics.
|
Charlie
Northern Colorado
OLD: 2013 RP-172, 2010 Honda Pilot 3.5L 4WD
PRESENT: 2014 Camplite 21RBS, 2013 Supercharged Tacoma 4L V6 4WD
|
 |
GLBCamper
Senior Member
Joined: 30 Jun 2015
Location: Oregon
Online Status: Offline
Posts: 274
|
Posted: 26 Oct 2015 at 7:41pm |
Originally posted by CharlieM
It's probably normal for the furnace to cycle more when the Pod is cold. The furnace will quickly heat the air and the thermostat will think it's warm. However, the walls etc. will still be cold. As soon as the blower stops the air around the thermostat will cool and the cycle begins anew. Eventually the walls etc. (and you) will warm and the thermostat will quit being so picky. The wonders of physics.
|
But.. The thermostat is set to 65 and the furnace will cycle off when it's not more than 45 inside. There is no way the thermostat thinks it's anywhere near 65. I know that once it's at or near the call temp it will cycle to maintain that temp. But it doesn't make much sense to me to shut off every few minutes on the way up to the call temp. But maybe that's normal for the pod's furnace? Furpod says no. I'm out of warranty so don't want to take it in if that's just the way it works.
|
Old: 2014 177 HRE
2015 Tacoma V6 4x4 Double Cab
New: 2016 EVO ATS 200rd
2016 F150 4x4 Sport
|
 |
Keith-N-Dar
podders Helping podders - pHp
Joined: 03 Apr 2011
Location: Mayville, WI
Online Status: Offline
Posts: 1447
|
Posted: 26 Oct 2015 at 7:42pm |
The other thing to consider is if your Pod is configured like our 177 with the cold air intake under the bed, and you store things under there, the cold air return is down there also and if you are partially blocking the return the bonnet switch in the furnace will shut it off when the temp goes to high. We move out the stored things and put them on the table at bed time to prevent this. Ours cycled like crazy until we figured this out.
|
Keith-N-Dar
Boris & Betty (Boston Terriers)
2011 R-Pod 177
2010 Ford F-150
|
 |
pnwcamper
Newbie
Joined: 22 Sep 2015
Location: Oregon
Online Status: Offline
Posts: 38
|
Posted: 26 Oct 2015 at 7:47pm |
I thought the cold air intake was on the outside the camper?
|
 |