Sewer Hose storage - Event Date: 02 Aug 2014

Nice job Craneman,  love the big handle.  RK, yes I just bought the Rustoleum Rattle can (for plastic) and painted it.  Used semigloss...

Originally posted by Leo B Really nice work!!

Tman
If your out there listing, exactly which bolts did you use to connect the 5x5 post to your pod ? Thanks in advance and safe travels .
Mark

Fred, I can't answer your first question.  I have had my HydroFlush for many years, long before built-in black tank rinsers were available, and even then I would rinse out the grey water tank while I was at it.  I still rinse out my grey water tank, although it is probably not necessary.  But more importantly, I use the HydroFlush after I close the grey water valve.  The strong flow of water flows through the sewer hose, really flushing the hose clean, much cleaner than by just letting the grey water flush it. 

Prior to removing the sewer hose from the black water valve, I use the same procedure so the hose is "almost" sanitized before I move it to the grey water valve.  (Yes, I realize that flushing the hose does not sanitize it, but it makes it more pleasant to handle).

BTW, there are at least 2 models of the HydroFlush, one has a 45 degree angle, the other a 90 degree angle.  I use the 45.

Bob

Originally posted by Tman Super tube looks great.  The dealer gave me the x-long hose during purchase, also didn't fit the factory tube.  I now have an electrical cord in there.  I have been thinking about the clear connector.  Is it worth having?

I strongly recommend the HydroFlush.  It has all the advantages of the clear connector but enables you to flush the grey water tank and hose, which you normally would not do.