List Your Mods: |
Post Reply | Page <1 1920212223 77> |
Author | |
LePodders
Groupie Joined: 20 Nov 2013 Location: Louisiana Online Status: Offline Posts: 80 |
Post Options
Quote Reply
Topic: List Your Mods: Posted: 11 Apr 2014 at 10:03am |
$15.99 + shipping for a pair correct, just be aware they do
have a very slight downward tilt in the raised position |
|
Keenan, Kathryn, Millie, Rio & Cali (2015 r pod 179)
Poddy by Nature |
|
LePodders
Groupie Joined: 20 Nov 2013 Location: Louisiana Online Status: Offline Posts: 80 |
Post Options Quote Reply Posted: 11 Apr 2014 at 10:04am |
just dont sit on it!
|
|
Keenan, Kathryn, Millie, Rio & Cali (2015 r pod 179)
Poddy by Nature |
|
Footslogger03
Senior Member Joined: 21 Jul 2011 Location: Laramie, WY Online Status: Offline Posts: 362 |
Post Options Quote Reply Posted: 11 Apr 2014 at 10:09am |
Really like the idea of removing the table frame/legs. I guess you could add a single "strutt" on a hinge that braced the table while in the upright position ??
Thanks again for the info. We have a 177. Not sure what the frame structure is up front where you have the brackets mounted. Did you use a stud finder ? 'Slogger |
|
Livin' the Dream ...'Slogger
|
|
LePodders
Groupie Joined: 20 Nov 2013 Location: Louisiana Online Status: Offline Posts: 80 |
Post Options Quote Reply Posted: 11 Apr 2014 at 11:17am |
We are toying with the idea of adding a single swing out hinge for extra support.
There is structure where he attached the bottom wood strips and along the top from side to side, just not sure how the internal attaches to the sides structures. Seems sturdy. We'll try it awhile and see how it does. May need more. The table was cut shorter which makes it nicer getting in & out of the booth seating. Used spare piece to make the sink side fold up table
|
|
Keenan, Kathryn, Millie, Rio & Cali (2015 r pod 179)
Poddy by Nature |
|
ilthyn
Groupie Joined: 21 May 2013 Location: Alberta Online Status: Offline Posts: 63 |
Post Options Quote Reply Posted: 11 Apr 2014 at 11:45am |
Brilliant solution to the table, which is a pain in the rear bumper. Ours has the fold-down legs which are not only flimsy but hard to deploy. I think you have solved my problem. I am interested in the stud question posed by someone else for securing the attachment points.
I built a wooden frame with a cutting board top to go over our stove top. This increases work area and is loose, so easily removed. It has to be off for travelling otherwise it winds up on the floor. It may be a little more practical than the hinge top someone showed. i would also like to resurrect my problem from last Fall, now the snow is melting up here. My furnace always starts initially, but rarely comes on when the trailer cools off and the thermostat demands heat. We have heard a slight buzz from the furnace which suggest to me that there is a sticky relay. Anybody have an opinion?
|
|
Cap-n-Cray
Senior Member Joined: 22 Feb 2014 Location: Bainbridge Is Online Status: Offline Posts: 121 |
Post Options Quote Reply Posted: 11 Apr 2014 at 1:18pm |
Keenan,
You are not going to use the dinette as a bed? |
|
Cary
2014 RP-177 |
|
Scoul
Newbie Joined: 28 Jan 2014 Online Status: Offline Posts: 27 |
Post Options Quote Reply Posted: 11 Apr 2014 at 6:29pm |
Added a fantastic vent ultra breeze cover with bug screen. Now the vent can stay open in foul weather. I might add that the people at the manufacturer are the best, as I needed a replacement part!!!
|
|
"Anyone can hold the helm when the sea is calm." Publilius Syrus
2015 GMC 1500 2014 182g 2009 Harley FXSTB |
|
LePodders
Groupie Joined: 20 Nov 2013 Location: Louisiana Online Status: Offline Posts: 80 |
Post Options Quote Reply Posted: 11 Apr 2014 at 6:42pm |
We can still use the dinette as a bed. If we plan on having company We have a thick piece of plywood that will extend across both seats with table folded down. It would only be kids using it
|
|
Keenan, Kathryn, Millie, Rio & Cali (2015 r pod 179)
Poddy by Nature |
|
ilthyn
Groupie Joined: 21 May 2013 Location: Alberta Online Status: Offline Posts: 63 |
Post Options Quote Reply Posted: 18 Apr 2014 at 11:17am |
A question on your table mod:
Can you tell me, please, when the table is folded down, what is the horizontal measurement from the wall to the table top surface? I am asking because we load my wife's (heavy) electric bike in the table area and the dimensions are tight. If the table sticks out too far then we cannot copy your excellent example. FYI, the bike rear wheel is secured in a channel mounted on a plywood sheet and then the bike is secured with tie-downs from under the seats. Inverted, the plywood base then becomes an outside table, mounted atop the wheel mudguard. A step stool is used for legs. Thanks, ilthyn
|
|
LePodders
Groupie Joined: 20 Nov 2013 Location: Louisiana Online Status: Offline Posts: 80 |
Post Options Quote Reply Posted: 18 Apr 2014 at 11:59am |
When folded down, the measurement is 2 inches.
|
|
Keenan, Kathryn, Millie, Rio & Cali (2015 r pod 179)
Poddy by Nature |
|
Post Reply | Page <1 1920212223 77> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |