![]() |
|
Post Reply ![]() |
Author | |
Monemkr2000 ![]() Newbie ![]() ![]() Joined: 15 Nov 2018 Location: North Carolina Online Status: Offline Posts: 17 |
![]() Posted: 10 Oct 2019 at 8:34pm |
My R-pod only has one port. It says Cable/Satellite. Unless Im missing one somewhere. Did find a workaround. Just run the cable thru the slide out. Works until we get home and figure out what's going on.
|
|
"We must always be aware that suddenly and unexpectedly we may find ourselves in a role where our performance has ultimate consequences."
|
|
![]() |
|
Buckeye ![]() Newbie ![]() ![]() Joined: 20 Jan 2019 Location: LSL, MO Online Status: Offline Posts: 37 |
![]() |
Happened to me when I connected to the cable port on the Pod (the one on the left) from the origin. Then I connected it to the aux port (the one on the right) and it worked.
|
|
Craig-retired teacher of the blind
Carol-retired legal admin asst Spot and Sam-the miscreant Shih-tzus "Politically incorrect with no real changes expected...” Former 2017 Rpod 180 F150 5.0 4x4 |
|
![]() |
|
StephenH ![]() podders Helping podders - pHp ![]() ![]() Joined: 29 Nov 2015 Location: Wake Forest, NC Online Status: Offline Posts: 6417 |
![]() |
When you are trying, do you have the antenna booster turned on or off? For cable viewing, it should be turned off. I have not tried it since we don't have cable, but that is what I have read. You may need to check the source the television is using also and change from antenna to cable, then you may need to scan for channels, but I am not sure about that. Also, one other thing to check: See if the cable connection on the post is an active connection. It may be there, but may not have an actual signal going through it.
|
|
StephenH
Happy is the man that findeth wisdom,... ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
|
![]() |
|
Monemkr2000 ![]() Newbie ![]() ![]() Joined: 15 Nov 2018 Location: North Carolina Online Status: Offline Posts: 17 |
![]() |
So I'm trying to get the cable to work. Ive hooked up the cable line from the pedestal to the POD. But when I go to scan for channels it's not picking any up. Is there a switch some where (2019 190 ) that I'm missing to get it to switch from the antenna. I thought the TV did the switch but maybe not??
|
|
"We must always be aware that suddenly and unexpectedly we may find ourselves in a role where our performance has ultimate consequences."
|
|
![]() |
Post Reply ![]() |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |