|
|
Post Reply 
|
| Author |
 Share Topic Printable Version Google Delicious Digg StumbleUpon Windows Live Yahoo Bookmarks reddit Facebook MySpace Newsvine Furl Topic Search  Topic Options
|
Philip 
Newbie 
Joined: 31 Jul 2018 Location: Montana Online Status: Offline Posts: 7 |
 Topic: Screw things into walls R-pod178Posted: 29 Aug 2018 at 6:29pm |
|
All of your ideas are excellent. Thanks for your help.
|
|
 |
|
|
Philip
Newbie
Joined: 31 Jul 2018 Location: Montana Online Status: Offline Posts: 7 |
Posted: 29 Aug 2018 at 6:28pm |
|
Thanks very much
|
|
|
|
|
BVK
Newbie
Joined: 21 Jul 2018 Location: Pacific NW Online Status: Offline Posts: 21 |
Posted: 27 Aug 2018 at 11:51am |
|
Thanks for the excellent illustration, Ghosthawk. I've added them to my list!
|
|
|
2012 RP-171 HRE, 2006 F-150
|
|
|
|
|
Ghosthawk
Senior Member 
Joined: 01 Apr 2018 Location: Fargo ND Online Status: Offline Posts: 128 |
Posted: 27 Aug 2018 at 7:55am |
|
I'm with coopercdrkey. I had one package that was pot metal gold in color, with hooks that made a nice flush fit. The 7/8ths screws I bought for plastic anchors fit them perfectly. https://www.todayshomeowner.com/images/article/wall-anchors-5.jpg  As he said predrill hole. snip off anything that makes it longer than 7/8ths of an inch. Slip it in the hole, tighten until firm but don't crank on it. Just a nice snug hand tight. Then insert your screw to hang whatever your going to hang. |
|
|
|
|
coopercdrkey
podders Helping podders - pHp
Joined: 26 Aug 2012 Location: Cedar Key, FL Online Status: Offline Posts: 457 |
Posted: 27 Aug 2018 at 5:23am |
|
I have had success using #8 plastic dry wall anchors. Cut off the self-tapping point and pre-drill a hole of the proper size, (that would be the same diameter as the hole that would have been created by the self-tapping point). This prevents the anchor from penetrating too deeply. Then secure your modification with #8 wood screws. (If #8 screws are not sufficient to secure your work, you may want to reevaluate your design...)
|
|
|
Bob and Joyce
Jennifer and Baxter, the Campin' Cocker Spaniels RP 177 "Key Pod" Chevrolet Silverado 1500 LT / Z71 |
|
|
|
|
David and Danette
podders Helping podders - pHp
Joined: 24 Nov 2009 Online Status: Offline Posts: 1222 |
Posted: 26 Aug 2018 at 8:52pm |
|
When I put screws into the lauan walls I used screws similar to a sheet rock screw. I was careful not to tighten to tight so that it would not pull through the lauan. You need to be careful there is no electrical wires or water pipes where you are using screws. It doesn't hurt to use a drop of wood glue where the screw enters the wall.
|
|
|
2018 Vista Cruiser 19BFD (2018-
2012 Vibe 6503 (2014-2019) 2009 r-pod 171 (2009-2014) Middle Tn 2014 Ram 1500 Quad cab |
|
|
|
|
BVK
Newbie
Joined: 21 Jul 2018 Location: Pacific NW Online Status: Offline Posts: 21 |
Posted: 26 Aug 2018 at 5:15pm |
|
I see so many people putting screws into their walls - I'm so paranoid about that! I'd be curious to know what size screws are recommended, too!
|
|
|
2012 RP-171 HRE, 2006 F-150
|
|
|
|
|
Philip
Newbie
Joined: 31 Jul 2018 Location: Montana Online Status: Offline Posts: 7 |
Posted: 26 Aug 2018 at 3:32pm |
|
I want to do some modifications in my R-Pod 178. Does anyone have a general description of the best places to safely place mounting screws and the materials one would be drilling into to place screws for bracket mounts holding less than 5 pounds?
|
|
|
|
|
Post Reply
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Screw things into walls R-pod178