Texman 182g Mods

Amazon. I can send the link if you need it. Easy to install too and still wotking good.

This is what i came up with to remount the battery box after having to move it because of the WDH. no room to spare.  I think i got really lucky that this actually worked out.  I remember looking at the others that have done this mod and didn't consider how tight all this is.  The only problem is that i have to remove the tank cover to get to the latch for the battery box.  Not a big deal since the only thing in there is batteries and no room for anything else anyway.  I used 1.25" tubing and my nutsert tool to mount to the frame and then used 1/4" stainless bolts to mount it all up.  I also had to reposition the safety brake by just turning it 90 deg to the inside, which isn't ideal, but should still work in case it ever happens.  Now i am ready to try the e2 on a trip this weekend i hope. 

brake controller installed.  Looks nice i think.

Went ahead and replaced the tires to D rated Carlisle


And mounted the battery disconnect and added another Zamp port or 12v outlet

I am opting for two posts since I will be reusing the existing table top. Since it is rectangular, I am opting for more support so it won't wobble and spill things. I plan on putting the floor mounts directly on the floor. If I think it isn't sturdy enough, then I will use anchors to attach to the floor.

My order is projected to arrive tomorrow.