Author |
Share Topic Topic Search Topic Options
|
Bovine0001
Groupie
Joined: 24 May 2016
Online Status: Offline
Posts: 40
|
Topic: Fridge doesn't work on propane, no clicks or gas f Posted: 01 Sep 2019 at 7:31am |
I agree on all your points, Offgrid. This is turning into an off season project real fast. Might be using a cooler for now....
|
2014 Rpod 178
Mods in Order:
1: Added USB charging port
2: Added Spigot at Fresh Water to make easy empty
3: Solar Panel
4: Cut dinette bench panel to improve access underneath
|
 |
podwerkz
Senior Member
Joined: 11 Mar 2019
Location: Texas
Online Status: Offline
Posts: 966
|
Posted: 30 Aug 2019 at 10:32am |
Originally posted by Bovine0001
....I have a European model... Any thoughts?
|
Oh yeah.....European Models are always gonna be expensive.
|
r・pod 171 gone but not forgotten!
|
 |
metaldpod
Newbie
Joined: 25 Jan 2018
Location: grand rapids mi
Online Status: Offline
Posts: 19
|
Posted: 30 Aug 2019 at 10:17am |
I'll throw this in here but not sure if it is relevant since we have a 179. When we first got our trailer we used the electric only on the fridge for quite a while. On one of our outings we wanted to use the propane for the fridge but we could not get it to work. After returning we brought it back to the dealer and they found that the gas line hose had become kinked due to the slide out going in and out and had to be re-routed. After this it worked with no problem. I can't remember if there was an alarm with this or not. Just a possibility....
|
David and Vicki Snyder, 2015 R179, 2012 Jeep Grand Cherokee
|
 |
offgrid
Senior Member
Joined: 23 Jul 2018
Online Status: Offline
Posts: 5290
|
Posted: 30 Aug 2019 at 9:18am |
Dometic must think their circuit boards are made of platinum or unobtainium. Still, its cheaper than a new fridge.
A question, does Dometic say you need to replace one board or two?
Other than just biting the bullet and replacing the board there is a chance that a visual inspection might turn up something you can fix. Look for corrosion, especially at the terminals and connectors, loose connectors, and burn spots and cold solder joints on the board.
You could also see if anyone has or will be replacing their frdige for another reason and you could buy/beg their board from them.
|
1994 Chinook Concourse
1995 RV6A Experimental Aircraft
2015 Rpod 179 - sold
|
 |
Bovine0001
Groupie
Joined: 24 May 2016
Online Status: Offline
Posts: 40
|
Posted: 30 Aug 2019 at 8:52am |
Update. Dinosaur Electronics says I have a European model, they can't help. So I call Dometic. They can ship me a replacement board for 300 bucks. Hitting Google for a better price only makes it worse at 500 bucks.
Any thoughts?
|
2014 Rpod 178
Mods in Order:
1: Added USB charging port
2: Added Spigot at Fresh Water to make easy empty
3: Solar Panel
4: Cut dinette bench panel to improve access underneath
|
 |
Bovine0001
Groupie
Joined: 24 May 2016
Online Status: Offline
Posts: 40
|
Posted: 27 Aug 2019 at 12:27pm |
Originally posted by Pod People
We had a control board problem that ended up being both boards were bad. apparently when one goes, it can take the other one out also. I don't remember which one is first -but they both needed to be replaced. We were not able to find suitable replacement after market boards and the dometic boards through a dealer totaled almost $900. we ended up replacing the entire refrigerator. Vann
|
Yeesh! Here is hoping this doesn't happen. I presume you mean the board with the controls up front and the board running the rest in the back. I think the board on the front is fine, as it is behaving right. Hard to tell otherwise.
|
2014 Rpod 178
Mods in Order:
1: Added USB charging port
2: Added Spigot at Fresh Water to make easy empty
3: Solar Panel
4: Cut dinette bench panel to improve access underneath
|
 |
Pod People
Senior Member
Joined: 22 Sep 2011
Location: Chapel Hill,NC
Online Status: Offline
Posts: 1088
|
Posted: 27 Aug 2019 at 8:01am |
We had a control board problem that ended up being both boards were bad. apparently when one goes, it can take the other one out also. I don't remember which one is first -but they both needed to be replaced. We were not able to find suitable replacement after market boards and the dometic boards through a dealer totaled almost $900. we ended up replacing the entire refrigerator.
Vann
|
Vann & Laura 2015 RPod 179
|
 |
john in idaho
Senior Member
Joined: 04 Nov 2014
Location: Eagle Idaho
Online Status: Offline
Posts: 613
|
Posted: 26 Aug 2019 at 10:13am |
I presume you did check for wasp nests and spider webs ?
|
 |
Bovine0001
Groupie
Joined: 24 May 2016
Online Status: Offline
Posts: 40
|
Posted: 25 Aug 2019 at 5:53pm |
Thanks Offgrid. I'll check in later.
|
2014 Rpod 178
Mods in Order:
1: Added USB charging port
2: Added Spigot at Fresh Water to make easy empty
3: Solar Panel
4: Cut dinette bench panel to improve access underneath
|
 |
offgrid
Senior Member
Joined: 23 Jul 2018
Online Status: Offline
Posts: 5290
|
Posted: 25 Aug 2019 at 3:55pm |
Looks like from the schematic that there are two cb's, the main control board and the gas igniter. Do you know which one is bad? Have you tried calling Dinosaur with your model number and asked them?
Also you might check out this link:
Good luck and please let us know what you wind up with....
|
1994 Chinook Concourse
1995 RV6A Experimental Aircraft
2015 Rpod 179 - sold
|
 |